What surfaces can Nanoprotect Concrete Sealer / Stone Impregation be used on?
Customer Service info at shinykings.com
Free domestic shipping on all orders + US$ 50
Best in Concrete Sealer. Up to 15% off bundle.
See how Nanoprotect performs on real concrete under real conditions. Left side single coated, right side uncoated! You might notice a square on the right side, this is a part that has been double coated for direct comparison. This is the reason why we strongly recommend double coating wet in wet application as it extends the life span from up to 2 years with single coat to 4 up to +7years!
Patio before pressure washing and sealing July 2023
Patio after pressure washing left side single coat, right side uncoated, except a small square inside right side with double coating, July 2023
Patio after 3 months, October 2023
Patio after 12 months, July 2024
Patio after 18 months, Jan 2025
Patio after 24 months, July 2025
Patio after 2.5 years January 2026
Comparison double sealed vs non sealed patio concrete after 2.5 years
Left: Unsealed Concrete
Open pores absorb water, dirt, and contaminants.
Middle: Surface Sealer
Forms a thin film on top that can wear, peel, or trap moisture.
Right: Nanoprotect Impregnation
Penetrates into the pores and protects from within.
Nanoprotect penetrates into the pore structure of concrete and stone. Unlike surface sealers, it does not form a film that can peel or wash away. Protection happens inside the material — where damage starts.
Step 1 – Clean the surface
Remove dirt, algae, and residue.
Step 2 – Let the concrete dry
The surface must be dry before application.
Step 3 – Apply Nanoprotect first coat with Pump Sprayer or Roll
Spray or Roll evenly. The product penetrates into the concrete pores.
Step 4 - Apply Second Coat wet in wet
Wait 10-20 minutes until first application soaked in a little but surface still wet and apply a second coat.
Step 5 – Let it cure
The impregnation dries invisibly inside the concrete. Let is cure for at least 24 hours, foot traffic is ok after 2 hours.
Use protective gloves during application. Keep children and pets away until fully cured.
Independently tested by Product Quality Seal LLC
Rated A+ for performance and usability
Tested on real concrete & stone surfaces
⭐⭐⭐⭐⭐
3,000+ customer reviews across global marketplaces, including Amazon.
I have a 500 squarefeet Driveway and i got this Concentrate to cover all the surface with a double seal as recommended. It was easy to mix and super easy to apply. I wish you guys would offer a Pump Sprayer too. But i got mine from Lowes for 9$ so all good. Application is easy, just spray on let it sit for about 10 minutes or so until the first application soaked a bit into the concrete then apply second coat. It works amazing! After 5 months i can confirm it`s still clean like on day 1. Abolutey Asthonishing!
Neighbor recommended it to me, he applied it more than a year ago. His driveway still looks perfectly clean. So i ordered it, easy to apply and decent price. Used the cheap crap from Homedepot, Lowes and ACE for years before, none of them held up more than 5-6 months.
Just did our 300 sqft driveway with it. Super easy to apply. needed 3 Gal for the whole driveway with a double coat.
Top impregnation for natural and concrete stone. 1 GAL are enough for approx. 300 sqft — this is where the price-performance ratio really comes into play. Nourishes, protects against moisture and dirt, easy to apply. Result: matte, natural look without shine. Highly recommended!
a high-performance, two-phase sealant designed to protect natural stone surfaces from water, dirt, and frost damage. Its deep-penetrating formula bonds with the stone's mineral components, creating a durable, invisible barrier that maintains the stone's natural appearance while providing long-lasting protection. Ideal for both indoor and outdoor use
I reseal the tiles every few years and this time I used this product. It was easy to apply and the instruction are easy to follow. There is no visible color on the tiles and could not smell anything out of ordinary which is a plus. The finish looked nice and clean. I will have to give it some time to see how well it works and protects.
product got on easily and protects stone from weathering/fading/etc. I like the way it beads water. This product does not enhance the color of the stone nor does it apply matt or high gloss. Doesn`t enhance gloss, which i liked!
I sealed a limestone patio and spilled some wine, washed right off. Figure your area carefully, you can always return any unopened extras, really does the job.
Bought this one last year in summer and didnt want to leave a review shortly after purchase. so i waited almost a year to review it. Well beside the easy application, i sprayed it on my driveway and patio, it really stays clean. I used a couple of others in the past 10 years and ALL OF THEM promised a lot but faded after 3-5 months. This stuff here is amazing, no stains, no algea, even after a year with a heavy winter... 5 Stars
Needed 3 Jugs for my driveway and my patio total. Super Easy to apply, just sprayed on let it dry and done. Very good price compared to the ones i got before.
Saw it on amazon, has more than 2700 reviews, cheaper here! Product does what it says!
Works as described! Top product! Easy to apply
Saw it on Reddit, checked it on amazon.com and then found it here cheaper. 3 days free shipping. Product works as advertised. Easy to apply!
I used this on my freshly cleaned old concrete driveway. It soaked in beautifully and now rain just beads up. Couldn’t believe how easy it was to apply.
Does exactly how advertised.
What surfaces can Nanoprotect Concrete Sealer / Stone Impregation be used on?
Nanoprotect is designed for absorbent, open-pore mineral surfaces, such as concrete, pavers, travertine, sandstone, and other natural stone.
It works on driveways, patios, walkways, pool decks, and similar areas.
It is not intended for painted, sealed, epoxy-coated, glazed, or non-absorbent surfaces.
How long does the protection last?
Nanoprotect provides long-term internal protection by reducing water absorption inside the material.
While the visible water-beading effect may gradually reduce over time, mostly after couple of weeks or months,
the internal protection remains active for many years, helping keep surfaces cleaner and easier to maintain. Our Real Life Experience shows up to 2 years for a single coat while the recommended double seal wet in wet (if applied correctly) shows effects for more than 4-7 years and even more.
How much product do I need?
Coverage depends on surface porosity.
Please refer to the chart shown above!
Do I need professional tools or experience?
No.
Nanoprotect is designed for easy DIY application using a standard hand pump sprayer or roller.
No special equipment is required.
Does it change the look of my concrete?
No.
Nanoprotect dries invisibly and keeps the surface’s natural appearance.
No gloss
No shine
No surface film
Why is Nanoprotect Concrete Sealer different from cheap sealers?
Many sealers use low quality ingredients and are diluted up to 95-97%! Many of them sit on top of the surface only and wear off quickly.
Nanoprotect Concrete Sealer and Stone Impregnation works the Dual Phase Technology inside the concrete, reducing water absorption from within — as well as on the surface, which is why it delivers longer-lasting results with less maintenance.
Is it safe to use around my home?
Nanoprotect is:
Water-based
Solvent-free
Free from microplastics and PFAS
Non-toxic when used as directed
Suitable for residential environments.
Thanks for subscribing!
This email has been registered!
| Product | SKU | Description | Collection | Availability | Product type | Other details |
|---|