What surfaces can Nanoprotect Concrete Sealer / Stone Impregation be used on?
Customer Service info at shinykings.com
Free domestic shipping on all orders + US$ 50
Best in Concrete Sealer. Up to 15% off bundle.

Professional deep-penetrating concrete sealer for driveways, patios, pavers, walkways and stone surfaces.

Most homeowners spend every season cleaning their driveway or patio. Pressure washing removes surface dirt — but the real problem happens inside the concrete.
Concrete is porous. Water penetrates the material and carries dirt, algae and contamination deep into the surface. Over time this leads to staining, green buildup, frost damage and constant cleaning.
Without protection, the cycle never stops.

Nanoprotect works differently from traditional sealers. Instead of creating a film on the surface, it penetrates deep into the concrete pores and changes how the material interacts with moisture.
This helps reduce water absorption from within and limits the deep penetration of dirt, staining and organic contamination.

Nanoprotect has been documented in a long-term outdoor patio test lasting more than 32 months.
The same patio was observed under real weather conditions including rain, humidity, dirt exposure and seasonal changes. This ongoing field test shows how deep-penetrating protection helps concrete stay cleaner and better protected over time.
Real patio. Real weather. Real long-term proof.

For maximum performance we recommend a wet-on-wet double application. This allows the sealer to penetrate deeper into the concrete structure and achieve better saturation.
One coat protects. Two coats maximize performance.

Nanoprotect is designed for simple DIY application. No complicated mixing. No professional equipment required.
Clean the surface thoroughly. Pressure washing is recommended.
Allow the concrete to dry completely before application. let dry for couple of days with no rain to ensure the inside of stone is completely dry.
Apply Nanoprotect evenly with a pump sprayer until the surface is saturated.
Apply a second coat wet-on-wet for the best result, then allow the surface to cure.
The 5 Gallon container is ideal for large driveways, patios, walkways and multi-area projects.
• Up to 200 sq ft per gallon with a single application
• Up to 135 sq ft per gallon with the recommended double wet-on-wet application for maximum protection
Actual coverage may vary depending on surface absorbency.
Approx. 675–1,000 sq ft per 5 gallon container.
Actual coverage depends on absorbency. Highly porous surfaces may require additional material.
Driveways, patios, pool decks, sidewalks and walkways.
Pavers, paving stones, natural stone, brick and absorbent mineral surfaces.
If the material is absorbent concrete or mineral stone, Nanoprotect can help protect it.
Once water and contamination penetrate concrete, stains become harder to remove. Nanoprotect helps protect your driveway, patio and outdoor spaces before long-term damage takes hold.
Apply it once. Enjoy cleaner concrete for years.
Independently tested by Product Quality Seal LLC
Rated A+ for performance and usability
Tested on real concrete & stone surfaces
⭐⭐⭐⭐⭐
3,000+ customer reviews across global marketplaces, including Amazon.
What surfaces can Nanoprotect Concrete Sealer / Stone Impregation be used on?
Nanoprotect is designed for absorbent, open-pore mineral surfaces, such as concrete, pavers, travertine, sandstone, and other natural stone.
It works on driveways, patios, walkways, pool decks, and similar areas.
It is not intended for painted, sealed, epoxy-coated, glazed, or non-absorbent surfaces.
How long does the protection last?
Nanoprotect provides long-term internal protection by reducing water absorption inside the material.
While the visible water-beading effect may gradually reduce over time, mostly after couple of weeks or months,
the internal protection remains active for many years, helping keep surfaces cleaner and easier to maintain. Our Real Life Experience shows up to 2 years for a single coat while the recommended double seal wet in wet (if applied correctly) shows effects for more than 4-7 years and even more.
How much product do I need?
Coverage depends on surface porosity.
Please refer to the chart shown above!
Do I need professional tools or experience?
No.
Nanoprotect is designed for easy DIY application using a standard hand pump sprayer or roller.
No special equipment is required.
Does it change the look of my concrete?
No.
Nanoprotect dries invisibly and keeps the surface’s natural appearance.
No gloss
No shine
No surface film
Why is Nanoprotect Concrete Sealer different from cheap sealers?
Many sealers use low quality ingredients and are watered down up to 95-97%! Many of them sit on top of the surface only and wear off quickly.
Nanoprotect Concrete Sealer and Stone Impregnation works the Dual Phase Technology inside the concrete, reducing water absorption from within — as well as on the surface, which is why it delivers longer-lasting results with less maintenance.
Is it safe to use around my home?
Nanoprotect is:
Water-based
Solvent-free
Free from microplastics and PFAS
Non-toxic when used as directed
Suitable for residential environments.
Where is Nanoprotect made?
Nanoprotect is proudly blended and bottled in Texas.
Thanks for subscribing!
This email has been registered!
| Product | SKU | Description | Collection | Availability | Product type | Other details |
|---|