Name: StoneprotecT SP5000U | Concrete Sealer | Long-Term Protection Against Water & Dirt for Driveway, Patio and More
Brand: shinykingsinc
Price: 169.99 USD
Availability: InStock

StoneprotecT SP5000U | Concrete Sealer | Long-Term Protection Against Water & Dirt for Driveway, Patio and More

Verkauf

shinykingsinc

StoneprotecT SP5000U

Availability auf Lager

Product Type

Vendor shinykingsinc

104 customers are viewing this product

Description
Customer Reviews

✅ WATERPROOF & STAINPROOF: When a stone surface is porous, dirt and water penetrate the stone capillaries and destroy the stone from the inside. The SP5000U concentrate protects your stone by preventing moisture and dirt from being absorbed. Thus, the stone retains its beautiful appearance.

✅ EXTREMELY EFFICIENT: Whether concrete slabs, paving stones, natural stone, granite, travertine, sandstone, quartzite, ceramic, tiles or marble, all absorbent, mineral substrates can be effortlessly sealed with the floor sealer. The 34 fl.oz concentrate mixed with 304 fl.oz water results in 338 fl.oz sealing solution, with which you can seal 861-1290 ft².

✅ ENVIRONMENTALLY FRIENDLY & QUICKLY DRY: The odorless and stain proof sealer is non-toxic to humans and animals as well as biodegradable when mixed. Clean the stones thoroughly. Then mix the concentrate with water in a 1:9 ratio and apply the protective sealer. After a drying time of 45 - 60 minutes, the cleaned surface is fully walkable and loadable.

✅ INNOVATIVE NANO-TECHNOLOGY: The stone care sealer was developed by leading nano experts from the USA and Germany. Thus, the cement sealant penetrates the stone without sticking its interior. The moisture that is created in the stone can escape instead of freezing. Therefore, no stone fractures and running marks are risked.

✅ EASY RE-TREATMENT: In contrast to conventional stone sealers, the old layer of our natural stone sealer does not have to be laboriously removed for re-treatment. StoneprotecT cement sealer fills the removed areas in the exterior and can simply be reapplied.

Premium Stone Sealer

StoneprotecT SP5000 U is a concrete and stone sealer for all absorbent stone types. Unlike other conventional polymer or siloxane-based stone sealers, SP5000 does not only bond or fill in the open-pored surfaces, but has a 2 Phase depth technology. It penetrates deep into the open-pored stone capillaries and forms its protection structure. The result is a long time lotus effect on and in the stone itself, that minimizes the penetration of dirt into the capillaries of the stones. Thus, dirt accumulating on the surface can be removed more easily. The treated surfaces will keep their clean appearance for up to years thanks to the Stoneprotect 2-phase long-term technology.

StoneprotecT SP5000 is a water based formulation which does not affect the external appearance of the treated surface. Even if the visible effect wears off over time, Stoneprotect retains its effect in the stone for many years. The visible effect can be refreshed at any time within minutes if desired.


IMPACT StoneprotecT SP5000 reduces water penetration on all absorbent substrates. Thus, the degree of soiling is extremely reduced. If the visible effect wears off, SP5000 can simply be applied on top of the existing sealant. We recommend refreshing at least once a year for best possible effects.	YIELD The yield of StoneprotecT stone sealing naturally depends very much on the type of stone to be treated. Absorbency, nature of the stone and structure of the surface all play a role. Practical experience shows: One liter of StoneprotecT SP5000 covers approx. 80 to 120 sq ft (10 to 12 sq m) of concrete stone per Liter.	DURABILITY You can reseal a surface already sealed with SP5000 at any time if the visible effect on the surface wears off. The sealant inside the stone will be still full effective even the visible lotus effect not recognizable. Reapply on the surface to regain visible effect if wanted or needed.

water proof membrane concrete waterproofing sealer natural stone coverings granite & stone sealer

Your new Favorite!

Stones keep their high quality looks longer.
The surface is water repellent and prevents dirt from penetration into stones.
Moisture penetration is reduced. Cleaning is made easier.
Prevents Moos and greenfilm much longer
Dries out within minutes and can be fully loaded and walked on immediately after drying.
Can be reapplied to the existing SP5000 at any time within seconds
Drying time approx. 30-45 minutes at an ambient temperature of 60 F (15 degrees Celsius).

waterproofing concrete sealant tiles grout marble sealer bathroom garden outdoor indoor

FAQs

Can StoneprotecT be applied on top of an existing sealer?

Yes, if the previous sealing was also done with StoneprotecT. However, if the stones have been treated with third-party products, these must first be completely removed. Otherwise, StoneprotecT stone sealer will not be able to bond to the stones because the ingredients of the other products might prevent bonding.

Does StoneprotecT prevent staining of the stone surface?

The unique nanotechnology in StoneprotecT SP5000 produces the well-known lotus effect. In the future, you will be able to remove dirt from the stone surface much more easily. In the best case, the sealant will effectively protect your stones from accumulating dust and dirt for many months or even years. On horizontal surfaces such as garage driveways, the visible effect may be less and last for a shorter time than on vertical surfaces such as on walls where effect was still seen even after 8 years.

Can the sealant also be applied to facades?

Yes, you can also apply StoneprotecT SP5000 nanosealing to open-pored, absorbent unsealed facade surfaces. This includes, for example, plaster facades.

Does the sealant remove green film and moss? StoneprotecT SP5000 is a stone and concrete sealer, not an algaecide. Therefore, the impregnation does not remove green deposits, moss or algae from the stone. Before applying SP5000 you can treat concrete and stones with a suitable anti green anti algae product and apply SP5000 on top of that.

How do I store StoneprotecT SP500?

Put the sealer in a cool but frost-free place. Keep the canister tightly closed. In particular, seal open canisters tightly. StoneprotecT SP5000 can be stored for up to 2 years. Make sure to shake well before use.

How to apply StoneprotecT


Pre-Cleaning The surfaces must be free of old sealants, grease, dust and dirt, so that SP5000 can bind in the stone capillaries. Otherwise, the effect cannot be adjusted. Be sure to allow the cleaned surface to dry out very thoroughly. If any third party anti algae products used before, make sure they dried out completely. Moisture prevents the binding of SP5000 in the stone.	Application Mix SP5000 U Concentrate 1:9 with water. Once the surface is free of dirt and completely dry, you can apply SP5000 by roller, brush or sprayer. The material will soak deep into the surface. Depending on the absorbency of the material, you can apply it also wet in wet to strenghten effects. Once the stone is saturated, it will remain on the surface. Please remove excess liquid from surface before drying time with a rag or cloth.	Dry for 30-45 minutes After successful application, let the surface dry, this usually happens in 30-45 min at an ambient temperature of about 60 F After drying, the surface is immediately usable and walkable and you can test the effect.	Test After complete drying, you can immediately test the surface. To do this, take e.g. a water bottle and put a few drops on the sealed and dried surface. The water drops should be on the surface and the water should no longer be absorbed into the stone. If the effect is not yet optimal as seen in the various videos on the net, repeat steps 2 and 3 to enhance the effect.

Customer Reviews

Based on 5 reviews Write a review

Categories

Top Sellers

Check out the product video