Check out the product video

StoneprotecT Concentrate 33.8 oz for up to 1200 sqft SP5000U

In stock
shinykingsinc
$199.99 $149.99
-25%
$149.99
customers are viewing this product
  • ✅ WATERPROOF & STAINPROOF: When a stone surface is porous, dirt and water penetrate the stone capillaries and destroy the stone from the inside. The SP5000U concentrate protects your stone by preventing moisture and dirt from being absorbed. Thus, the stone retains its beautiful appearance.
  • ✅ EXTREMELY EFFICIENT: Whether concrete slabs, paving stones, natural stone, granite, travertine, sandstone, quartzite, ceramic, tiles or marble, all absorbent, mineral substrates can be effortlessly sealed with the floor sealer. The 34 fl.oz concentrate mixed with 304 fl.oz water results in 338 fl.oz sealing solution, with which you can seal 800-1200 ft².
  • ✅ ENVIRONMENTALLY FRIENDLY & QUICKLY DRY: The odorless and stain proof sealer is non-toxic to humans and animals as well as biodegradable when mixed. Clean the stones thoroughly. Then mix the concentrate with water in a 1:9 ratio and apply the protective sealer. After a drying time of 45 - 60 minutes, the cleaned surface is fully walkable and loadable.
  • ✅ INNOVATIVE NANO-TECHNOLOGY: The stone care sealer was developed by leading nano experts from the USA and Germany. Thus, the cement sealant penetrates the stone without sticking its interior. The moisture that is created in the stone can escape instead of freezing. Therefore, no stone fractures and running marks are risked.
  • ✅ EASY RE-TREATMENT: In contrast to conventional stone sealers, the old layer of our natural stone sealer does not have to be laboriously removed for re-treatment. StoneprotecT cement sealer fills the removed areas in the exterior and can simply be reapplied.   
    waterproofing concrete sealant tiles grout marble sealer bathroom garden outdoor indoor

    FAQs

    Can StoneprotecT be applied on top of an existing sealer?

    Yes, if the previous sealing was also done with StoneprotecT. However, if the stones have been treated with third-party products, these must first be completely removed. Otherwise, StoneprotecT stone sealer will not be able to bond to the stones because the ingredients of the other products might prevent bonding.

    Does StoneprotecT prevent staining of the stone surface?

    The unique nanotechnology in StoneprotecT SP5000 produces the well-known lotus effect. In the future, you will be able to remove dirt from the stone surface much more easily. In the best case, the sealant will effectively protect your stones from accumulating dust and dirt for many months or even years. On horizontal surfaces such as garage driveways, the visible effect may be less and last for a shorter time than on vertical surfaces such as on walls where effect was still seen even after 8 years.

    Can the sealant also be applied to facades?

    Yes, you can also apply StoneprotecT SP5000 nanosealing to open-pored, absorbent unsealed facade surfaces. This includes, for example, plaster facades.

    Does the sealant remove green film and moss? StoneprotecT SP5000 is a stone and concrete sealer, not an algaecide. Therefore, the impregnation does not remove green deposits, moss or algae from the stone. Before applying SP5000 you can treat concrete and stones with a suitable anti green anti algae product and apply SP5000 on top of that.

    How do I store StoneprotecT SP500?

    Put the sealer in a cool but frost-free place. Keep the canister tightly closed. In particular, seal open canisters tightly. StoneprotecT SP5000 can be stored for up to 2 years. Make sure to shake well before use.

You have successfully subscribed!